Aung Metals, a reputable manufacturer and supplier located in Naypyidaw, Myanmar, is well-known for crafting top-notch Stainless Steel 410 Flat Bars. These bars are designed with strength, durability, and wear resistance in mind, making them perfect for a variety of industrial and engineering uses. Aung Metals is committed to ensuring that every product meets international standards through cutting-edge manufacturing techniques and rigorous quality control. Their Stainless Steel 410 Flat Bars come in a range of sizes and finishes to meet different needs, delivering outstanding performance and longevity even in tough conditions.
The composition of Stainless Steel 410 Flat Bars includes chromium (11.5–13.5%), carbon (up to 0.15%), manganese, silicon, phosphorus, and sulfur. This martensitic stainless steel grade is known for its impressive hardness and moderate resistance to corrosion. The bars boast a tensile strength of approximately 480–620 MPa, a yield strength of around 275 MPa, and an elongation of 20%. They can be hardened and tempered to enhance their mechanical strength, providing good impact resistance and stability under mechanical stress and high temperatures.
Dimensions : ASTM, ASME
Standard : ASTM / ASME SA A582, A276, A564, ASTM A484, 484M
Surface : hrap, hot rolled pickled or sand blasting finished, cold drawn, polished, hairline
Range : Range – 3.17mm to 350mm dia
| Element | C | Cr | Mn | Ni | P | S | Si |
| SS 410 | 0.15 | 11.5-13.5 | 1.00 | 0.75 | 0.040 | 0.030 | 1.00 |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 410 | 1.4006 | S41000 | SUS 410 | 410S21 | – | – | 56A |
Stainless Steel 410 Flat Bars are widely used in applications requiring moderate corrosion resistance and high strength, including automotive parts, cutlery, valves, fasteners, turbine blades, surgical instruments, and industrial equipment due to their martensitic properties.
Standard sizes for SS 410 Flat Bars typically range from 1/4" to 6" in thickness, and 1" to 12" in width, with lengths varying from 10 to 20 feet. Custom dimensions are also available based on specific requirements.
SS 410 Flat Bars can undergo heat treatments such as annealing, hardening, and tempering. Annealing improves ductility, while hardening increases strength and hardness. Tempering after hardening reduces brittleness and enhances toughness, making the material suitable for various applications.
Stainless Steel 410 Flat Bars are commonly used in applications that demand strength, hardness, and moderate corrosion resistance. They are ideal for creating pump shafts, valve components, turbine blades, fasteners, and various machinery parts. These bars are also utilized in the automotive, petrochemical, and marine industries due to their wear resistance and ability to perform well in mildly corrosive environments. Furthermore, Stainless Steel 410 Flat Bars are suitable for kitchen utensils, surgical instruments, and industrial tools where toughness and machinability are crucial. Their versatility and durability make them a go-to material across many sectors.
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
Aung Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Naypyidaw, Myanmar
Copyright 2024 Aung Metals. All rights reserved
